A waterproof repair tape with a thick rubber backing and a strong adhesive. It shapes itself to pipes, gutters and sheeting, and seals out water, air and moisture. It's recommended for PVC, metal, wood, glass, rubber, fibreglass, stone and concrete, plus some plastics and fabrics.
Clean off grease, dirt and algae first. Cut the tape bigger than the hole with the backing film still on, then peel it and press it down firmly, smoothing out the air bubbles. On a wet surface, press hard enough to squeeze the water out from under it. For fabric, warm the tape with a hair dryer. Test it on a small patch first.
It's meant as a temporary, emergency repair. It hasn't been tested for safe use with plants and animals or for food, so don't use it on water troughs, drinkers, feed bins or drinking water containers. Don't use it on tyres, radiator hoses, gas or oil tanks, or anywhere it will be walked on. Most paints won't stick to it.
Specifications
Roll size
Large, 10 cm × 1.5 m, MAX, 20 cm × 7.6 m, Giant, 30 cm × 3 m
Type
Waterproof rubber repair tape
Apply at
About -7 to 49 °C
Withstands
About -57 to 93 °C
Surfaces
PVC, metal, wood, glass, ceramic, rubber, fibreglass, stone, concrete, some plastics and fabrics
Not for
Troughs, drinkers, drinking water, food, tyres, radiator hoses, gas or oil tanks
