HyBag foam gun

Description

A foam gun for HyBag cleaner bags, for foaming down animal housing, vehicles and equipment. Fit it to your pressure washer's lance or handle, click in a bag and turn the black wheel to break the seal. The foam goes on at low pressure.

The dose is set by the venturi and the restrictor. It comes fitted with the 1.7 venturi and 0.7 restrictor, with 1.3 and 1.5 venturis and 0.5, 0.6, 0.8, 1.0 and 1.2 restrictors loose in the box. Pick the venturi to suit your washer's flow: 1.3 under 14 L/min, 1.5 under 20 L/min, 1.7 under 25 L/min. T&T Cleaner needs the 1.0 or 1.2 restrictor.

The inlet is a G¼" female thread. Couplings aren't included: Nilfisk, Kränzle, Stihl, Clena and Meier-Brakenberg washers take the KEW 1/4" male coupling, and Kärcher machines need an M22 one. It takes up to 250 bar, with clean water up to 30 °C.

Wear a spray coverall, acid-resistant gloves and a half-face mask. Never point the foam at people or animals, keep the foam head at least 50 cm from surfaces, and never block it. Don't use the gun with any part missing. Hold a bag by its hard top and never squeeze it. Don't store the gun with a bag connected, and keep both somewhere frost-free, dry and out of reach of children. Clean the gun thoroughly after use.

Specifications

Type	Foam gun
Bags	HyBag TopFoam Power, HyBag T&T Cleaner
Material	Stainless steel
Inlet	G¼" female thread
Max pressure	250 bar
Water	Clean, up to 30 °C
Weight	0.7 kg
Size	25 × 10 × 10 cm
In the box	Gun with 1.7 venturi and 0.7 restrictor fitted, 1.3 and 1.5 venturis, 0.5, 0.6, 0.8, 1.0 and 1.2 restrictors